To remove rear wiper blade on Toyota RAV4 models, lift the arm away from the glass, release the tab or clip where the blade meets the arm, then slide the old blade off, handling the arm so it does not snap back on the glass. The release design varies by model year, so check your owner’s manual. Related guides: replace rear wiper blade on Toyota RAV4 and remove rear windshield wiper on Toyota RAV4.
How to Remove Rear Wiper Blade on Toyota RAV4: Step-by-Step
- Lift the arm away from the glass.
- Press the tab or release where the blade connects to the arm.
- Slide or pivot the blade off the arm.
How to Easily Install Your New Rear Wiper Blade
Slide the new blade onto the arm until it clicks, then lower the arm slowly.
Proper Blade Orientation
Fit the blade the same way round as the old one.
Secure Housing Connection
Make sure the blade is fully seated and the connector clicks.
The Importance of Rear Wiper Maintenance
A clean rear wiper helps visibility behind you, especially in rain.
Top Maintenance Tips for Longevity of Your Wipers
Clean the blades, keep the glass clean and replace worn rubber.
Regular Blade Inspections
Look for cracks, hardening or splits in the rubber.
Seasonal Replacement Schedule
Many people change wipers about once a year, depending on climate.
Clean Windshield Frequently
A clean glass surface helps the blade last longer.
When to Consider Replacing Your Wiper Blades?
Replace when they streak, chatter or skip.
Tools You Need for Rear Wiper Blade Replacement
Usually none, or a small flathead screwdriver for a stiff tab.
Related reading:
Frequently Asked Questions
How to Remove the Rear Wiper Blade in RAV4?
Lift the arm, release the tab and slide the blade off.
How to Remove Rear Wiper Blade Assembly?
Release the blade from the arm, or remove the arm nut for the whole assembly.
How to Change Rear Wiper Blade on 2011 Toyota RAV4?
Use the release method above with a blade listed for the 2011 RAV4.
How to Remove Toyota Rear Wiper Arm?
Lift the cap at the base of the arm, remove the nut and pull the arm off. Mark its position first.
Conclusion
Removing the rear blade is quick. Be careful with the arm.
