The Toyota GR Supra bolt pattern is 5×112 (five lugs on a 112 mm circle), shared with the BMW platform it is built on. Confirm the figure in your owner’s manual or with the wheel maker, and check center bore, offset and tire clearance too, because the same bolt pattern does not guarantee a wheel will fit.
Toyota GR Supra Bolt Pattern Explained
The bolt pattern is the number of lug holes and the diameter of the circle they sit on. For the GR Supra it is 5×112, which means five holes on a 112 mm circle.
Key Specifications for the 2019-2025 GR Supra
These figures are commonly listed. Confirm them for your model year before buying wheels.
Bolt Pattern Specifications
- Bolt pattern: 5×112
- Center bore: commonly listed as 66.5 mm
- Lug thread: commonly listed as M14x1.25
- Torque and nut or bolt type: check the owner’s manual
Recommended Wheel Sizes
The factory wheels are staggered, with wider rears. Use the sizes in your owner’s manual or the placard as a starting point.
Common GR Supra Wheel Fitment Issues and Solutions
- Wrong bolt pattern: do not use adapters casually; buy wheels made for 5×112.
- Wrong center bore: use hub-centric rings.
- Poor offset or width: check the clearance with the tire fitted.
- Wrong lug hardware: confirm bolts or nuts and the seat type.
Best Wheel Sizes and Offsets for GR Supra
There is no single best size. Follow the wheel maker’s fitment guide for your model year and ride height, and check the clearance.
Why Center Bore and Thread Size Matter for Wheel Fitment
The center bore should match or exceed the hub, and the thread and seat type must match the lug hardware. Otherwise the wheel may vibrate or not mount safely.
Choosing the Right Wheels for Your GR Supra
Match the bolt pattern, center bore, width and offset, and choose a maker that lists Supra fitment.
Wheel Size Considerations
Larger wheels with lower-profile tires change ride quality and can reduce the margin against curb damage.
Offset and Fitment
A wheel with the wrong offset can rub the fender or the suspension. Compare it with the factory offset before buying.
How Aftermarket Wheels Boost Performance
Lighter wheels can reduce unsprung weight, but the result depends on the wheel and the tire. Choose for fitment first.
What Tires Work Best With GR Supra Wheels?
Use the tire sizes in your owner’s manual or the placard, and ask a tire shop about tires for how you drive.
Safety Considerations for GR Supra Wheel Upgrades
- Use wheels rated for the car’s weight.
- Torque lug fasteners to the specification and recheck after driving.
- Avoid stacking spacers and adapters.
- Have a shop install and balance the wheels.
Frequently Asked Questions
What Is the Bolt Pattern on a Toyota Supra?
The GR Supra (A90/A91) is 5×112. The MK4 and older Supras use a different pattern, so check your generation.
What Toyota Has a 5×114.3 Bolt Pattern?
Many Toyota cars and SUVs use 5×114.3, including some Camry, RAV4 and Corolla models, but it varies by model and year, so check yours.
Can I Fit MK4 Supra Wheels on a GR Supra?
Not directly: MK4 wheels use a different bolt pattern, so they do not bolt on without adapters, which are best avoided.
What Is the Bolt Pattern on a 1990 Toyota Supra?
Late-1980s and early-1990s Supras are commonly listed as 5×114.3. Confirm for your car.
Conclusion
The GR Supra uses 5×112. Confirm center bore, offset and lug hardware, and buy wheels from a maker that lists Supra fitment.
