To change the thermostat in a Toyota RAV4, let the engine cool, drain some coolant, remove whatever blocks access to the thermostat housing (which differs by engine and model year), replace the thermostat and its gasket or seal, refill with the specified coolant, and bleed the air. It is an intermediate job, so follow the factory service manual for your engine, and use a shop if you are not sure. Related: how to change a tire on a Toyota RAV4 and how to change brakes on a Toyota RAV4.
Why You Need to Change the Thermostat in Your RAV4

A stuck thermostat can cause overheating, or an engine that runs too cool and has poor heat. Symptoms include a temperature gauge that swings, weak cabin heat and poor fuel economy.
Tools and Parts Required for the Job
- The correct thermostat and gasket or seal for your engine
- The coolant specified in the manual
- Basic hand tools and a torque wrench
- A drain pan, gloves and eye protection
Drain Coolant and Disconnect Battery Before Thermostat Replacement
Work on a cold engine, because hot coolant can scald. Disconnect the negative battery terminal, drain the coolant into a pan, and dispose of it properly. It is toxic.
Remove the Alternator for Access to the Thermostat
Depending on the engine and model year, you may need to move or remove other parts, such as the intake duct or other components, to reach the thermostat housing. Follow the factory service manual for your engine, and label the connectors.
How to Change the Thermostat in a Toyota RAV4: Removing and Installing

- Remove the housing bolts and the housing.
- Take out the old thermostat and note its orientation.
- Clean the mating surfaces.
- Fit the new thermostat with a new gasket or seal.
- Refit the housing and torque the bolts to the specification.
Reassemble: Alternator and Serpentine Belt Installation
Refit anything you removed, in reverse order, and tighten to the specified torque. Route the belt correctly if you removed it.
Check Your Coolant Level and Test for Leaks
Refill with the specified coolant mix and bleed the air as the manual directs. Run the engine to operating temperature, watch the gauge, check for leaks, and re-check the coolant level when the engine has cooled.
Related reading:
Frequently Asked Questions
How Much Does It Cost to Replace a Thermostat in a Toyota RAV4?
The cost varies by model year, parts and local labor rates. Ask a shop for a written quote.
Can I Replace My Car Thermostat Myself?
Some owners do, with the factory procedure. If you are unsure, use a shop.
What Is the Most Common Problem With the Toyota RAV4?
It depends on the model year. Check the recalls and owner complaints for your year at nhtsa.gov.
What Year of RAV4 to Stay Away From?
There is no blanket answer. Research the specific year and get an inspection.
Conclusion
To change the thermostat in a Toyota RAV4, follow the manual for your engine, use the correct parts and coolant, and bleed the air.
