Toyota RAV4 trailer hitches: 10 Listings Compared

The best Toyota RAV4 trailer hitches are the ones that state your model year, because the Toyota RAV4 changed between generations (2013-2018 and 2019-2025). This page lists 10 Amazon products with the details from their listings, and we have not tested them. Capacity, torque and load limits come from your owner manual, not from an accessory listing. Compare the stated fit, size and material, then confirm anything vehicle-specific on Amazon before you order.

Disclosure: some links on this page are Amazon affiliate links, and we may earn a commission at no extra cost to you. Details come from the Amazon listings and can change; we have not tested these products.

Top Picks: Toyota RAV4 trailer hitches

Category

Product

Listing details

🏆 Best Overall

Draw-Tite 75235

See listing

💰 Best Budget

KUAFU Hitch

See listing

⭐ Best for Newer RAV4s

TangMiGe Hitch

See listing

🎯 Best for Lexus NX

ILONPA NX Hitch

See listing

🔰 Most Rugged Build

AutoBeeDen Hitch

See listing

❌ Least Recommended

ILONPA Carrier

See listing

💼 Best Replacement Fit

KUAFU 13416

See listing

🚀 Best Ground Clearance

Draw-Tite 76134

See listing

🔧 Easiest Install

HECASA Hitch

See listing

🛡️ Best Corrosion Resistance

WEISIGAO Hitch

See listing

How We Picked These Hitches

Finally we looked at real-user feedback to spot consistent strengths or recurring fit issues.

Draw-Tite 75235

If you want a hitch that stays out of the way and gets the job done, this Draw‑Tite is a dependable pick. You can use it for weekend bike racks, a cargo carrier for moving day, or a small utility trailer when you need extra hauling capacity. The receiver tucks neatly under the bumper, the welds and finish feel heavy duty, and most people find the bolt‑on install straightforward with basic tools.

Plan for a bit of prep like chasing frame threads or loosening an exhaust hanger on some model years, and you’ll have a solid, long‑lasting hitch that fits most 2006–2018 RAV4s.

Sentiment chart from the original article, not based on our own testing

Versatility

You can attach a bike rack, cargo carrier or tow a small trailer without changing hardware. The 2″ receiver works with common accessories, so it’s just as handy for daily errands as it is for weekend camping runs or spring trips where you need extra gear space.

Durability

The alloy steel frame and black powder‑coat give this hitch real staying power against road grime and rust.

Key Benefits

  • High towing and tongue weight ratings
  • Vehicle‑specific fit for 2006–2018 RAV4
  • All‑welded alloy steel construction
  • Black powder‑coat resists corrosion

Buy Now

Pros

  • All-welded alloy steel construction is durable
  • 675 lbs towing weight handles bikes and carriers

Cons

  • 2-inch receiver is bulky and protrudes noticeably

KUAFU Hitch

KUAFU Class 3 2-inch receiver made from professional steel with powder-coated finish; vehicle-specific fit for 2006–2018 RAV4 and a maximum towing capacity listed at 675 pounds.

This KUAFU hitch is a practical choice if you want something that’s straightforward to install and doesn’t demand a buddy to hold it while you wrestle with bolts. The three-piece design makes alignment easier when you’re working alone, and it’s built for everyday tasks like carrying a bike rack or a cargo carrier and occasional light hauling. The powder coat helps it resist road grime, and most people find it a solid, no-nonsense option for older RAV4s. If you want a capable receiver that’s user-friendly for DIY installs, this one earns a casual recommendation.

Sentiment chart from the original article, not based on our own testing

Versatility

Good for bike racks, cargo carriers and light towing tasks; the 2-inch receiver works with common accessories so it covers most weekend and utility uses.

Durability

Built from professional steel with a powder-coated finish, it stands up to regular use and road conditions; touching up any shipping nicks helps prevent surface rust over time.

Key Benefits

  • Three-piece design eases solo installation
  • Vehicle-specific fit for 2006–2018 RAV4
  • Professional steel with powder-coated finish
  • Works well with bike racks and cargo carriers
  • Generally consistent customer satisfaction

Buy Now

Pros

  • Three-piece design eases solo installation process
  • Professional steel construction withstands regular use
  • Straightforward mounting works on 2006-2018 RAV4

Cons

  • Limited to older RAV4 models only

TangMiGe Hitch

This TangMiGe hitch is a great fit if you want a tucked, heavy‑duty receiver that doesn’t draw attention but handles real work. It’s handy for daily gear like bike racks or cargo carriers and scales up for long trips or light trailers when you need extra hauling capacity.

The design makes it possible to install solo if you follow a few simple steps like leaving side brackets loose and easing the exhaust hangers; once in place it looks neat under the bumper and feels solid when you load it up. If you drive a 2019–2025 RAV4 and want a reliable, unobtrusive hitch, this one checks those boxes.

Sentiment chart from the original article, not based on our own testing

Versatility

Works well with bike racks, cargo carriers and light trailers; the 2″ receiver accepts common accessories for everyday and trip use.

Durability

Carbon steel construction and a gloss powder coat give it strong resistance to road wear; the finish and welds feel robust and built for repeated use.

Key Benefits

  • High 4,500 lb gross trailer weight rating
  • Tucks neatly under the bumper for a clean look
  • Carbon steel with gloss powder coat for corrosion resistance
  • Three‑piece install approach helps solo installation
  • Vehicle compatibility across 2019–2025 RAV4 and RAV4 Prime

Buy Now

Pros

  • Carbon steel construction with gloss black finish
  • Heavy-duty 4,500 lbs GTW handles small trailers
  • Works with RAV4 Prime for wider compatibility

Cons

  • May protrude more than factory appearance

ILONPA Receiver

This ILONPA receiver is a practical, no-frills hitch if you want something that tucks under the bumper and handles everyday hauling. You can mount a bike rack, carry a cargo carrier or tow a light trailer without fuss, and the square-tube frame looks understated on the rear of your RAV4.

Installation is straightforward for someone comfortable under the car, though you should verify fit for your exact model year before you start. If you want a simple, functional hitch that blends into the vehicle, this one is worth considering.

Sentiment chart from the original article, not based on our own testing

Versatility

Good for bike racks, cargo carriers and occasional light towing; the 2″ receiver works with a wide range of common accessories so it suits weekend trips and everyday hauling.

Durability

The metal construction with a powder-coated finish gives decent protection against road wear and moisture; touching up any shipping or installation nicks keeps it looking and performing well over time.

Key Benefits

  • 2″ Class 3 receiver fits common accessories
  • Square-tube frame for a low-profile look
  • Powder-coated finish resists corrosion
  • Handles bike racks and cargo carriers well
  • Vehicle-specific design for 2019–2024 models

Buy Now

Pros

  • Square-tube design is practical and low-profile
  • 4,000 lbs towing rating suits most uses
  • Fits multiple RAV4 models across generations

Cons

  • Square tubes can rattle without proper bushings

AutoBeeDen Hitch

Class 3 2″ receiver compatible with 2006–2018 Toyota RAV4; carbon steel construction with gloss black powder coat and a 3,500 lb maximum towing capacity.

If you want a solid, straightforward hitch that won’t draw attention, this AutoBeeDen is a dependable option. You can rely on it for bike racks, cargo carriers or occasional light trailers, and many owners find the mounting process quick once you free up the exhaust hanger and align the bolts. The welds and fit look purposeful rather than fancy, so if you prefer a practical, built‑to‑work receiver that sits neatly under the bumper, this one fits the bill.

Sentiment chart from the original article, not based on our own testing

Versatility

You can mount bike carriers, cargo platforms and tow light trailers; the 2″ opening supports the standard range of weekend and utility accessories.

Durability

The carbon steel frame and gloss powder coat provide good protection against road wear, and the solid welds suggest long‑term service; touching up any shipping scrapes helps prevent surface rust over time.

Key Benefits

  • Class 3 2″ receiver works with common accessories
  • Carbon steel with gloss powder coat for corrosion resistance
  • Good weld quality and sturdy construction
  • Vehicle compatibility across 2006–2018 RAV4
  • Relatively straightforward bolt‑on installation

Buy Now

Pros

  • Carbon steel construction withstands heavy use
  • Straightforward mounting once bolts are freed
  • Compact design minimizes underneath protrusion

Cons

  • 3,500 lbs towing rating is lower than competitors

ILONPA Carrier

2″ Class 3 square-tube receiver for 2006–2018 Toyota RAV4 with powder-coated metal construction and a 3,500 lb maximum towing capacity.

If you’re looking for a low-profile hitch to hide under the bumper, this ILONPA carrier is designed for exactly that. It accepts standard 2″ accessories so it’s useful for bike racks, cargo platforms and occasional light trailers.

Installation is fairly typical for a bolt-on hitch, but because this listing has very limited feedback you should verify bolt alignment and hardware before you start. If fit matters a lot to you, treat this as a model to double-check rather than an automatic pick.

Sentiment chart from the original article, not based on our own testing

Versatility

Handles bike racks, cargo carriers and light trailers; the 2″ opening accepts the usual weekend and utility accessories.

Durability

Key Benefits

  • Standard 2″ receiver works with common accessories
  • Square-tube frame keeps a tucked, low profile
  • Powder-coated finish offers basic corrosion resistance
  • Made for 2006–2018 Toyota RAV4 fitment

Buy Now

Pros

  • Low-profile design hides neatly under bumper
  • Accepts standard 2-inch trailer accessories
  • Straightforward bolt-on installation process

Cons

  • 3,500 lbs maximum towing is entry-level capacity

KUAFU 13416

If you drive a 2019–2024 RAV4 and want a heavy-duty-looking receiver that fits like the original, this KUAFU unit is worth a close look.

Installation can be tight on the passenger side, so having the right sockets and a jack makes the job much easier. For a solid replacement that balances durability and fit, this hitch is a practical, homeowner-friendly choice.

Sentiment chart from the original article, not based on our own testing

Versatility

Handles bike racks, cargo carriers and light trailers; the 2″ receiver accepts the common range of weekend and utility accessories.

Durability

Alloy steel plus a powder-coated finish provides solid protection against road wear, though some owners touch up minor paint chips after delivery to prevent surface rust.

Key Benefits

  • Vehicle-specific fit for 2019–2024 RAV4
  • Alloy steel construction with powder-coated finish
  • Fits standard 2″ accessories like bike racks and carriers
  • Generally consistent fit and build quality

Buy Now

Pros

  • Vehicle-specific fit for 2019-2024 RAV4 models
  • 4,000 lbs maximum towing suits everyday needs
  • Alloy steel construction resists corrosion

Cons

  • Replacement unit may need additional hardware

Draw-Tite 76134

Max-Frame Class 3 2″ receiver with all-frame attachment points, alloy steel construction and black powder coat; custom-fit for 2013–2018 RAV4 with strong welded construction.

This Draw‑Tite Max‑Frame hitch is built for drivers who want strength and a hidden, factory‑like look. You can use it for bike racks, cargo carriers or hauling small trailers while keeping good ground clearance under the bumper.

The welded crossbar and CAD‑matched fit make it feel like a high‑quality, long‑lasting part, though you should test accessory fit before final installation. If you want a rugged receiver that tucks away neatly and handles tougher trips, this one is a dependable pick.

Sentiment chart from the original article, not based on our own testing

Versatility

Works well with bike racks, cargo carriers and light trailers; the 2″ receiver accepts the usual range of weekend and utility accessories for daily errands or longer trips.

Durability

Alloy steel construction with a powder‑coat finish and welded joints give this hitch strong resistance to road wear; you may want to touch up any delivery scrapes to prevent surface rust over time.

Key Benefits

  • High-strength Max‑Frame construction
  • Custom CAD fit for 2013–2018 RAV4
  • Hidden, low‑profile installation for better ground clearance
  • Solid welded crossbar and durable powder coat
  • Meets V‑5 and SAE J684 testing standards

Buy Now

Pros

  • All-frame attachment points distribute stress evenly
  • Strong welded construction handles real towing
  • Factory-like appearance blends with bumper

Cons

  • Custom-fit installation can be complex and time-consuming

HECASA Hitch

HECASA Class 3 2″ receiver for 2019–2023 Toyota RAV4; alloy steel construction with black powder coat and vehicle‑specific fit.

This HECASA hitch is a solid, no-nonsense option if you want a clean, tucked receiver for a 2019–2023 RAV4. It works well for bike racks, cargo carriers and light trailers, and many owners find installation straightforward when you have an 18 mm wrench or a reversing ratchet.

The bolted design makes it easier to replace or service later, and the finish looks uniform on arrival in most cases. If you want something that blends in and handles everyday towing needs, this one is worth considering.

Sentiment chart from the original article, not based on our own testing

Versatility

Good for bike racks, cargo carriers and light trailers; the 2″ opening fits the usual range of weekend and utility accessories.

Durability

Alloy steel plus a powder‑coat finish gives decent protection against road wear; inspect the finish on arrival and touch up any nicks to prevent surface rust.

Key Benefits

  • Vehicle‑specific fit for 2019–2023 RAV4
  • Alloy steel with black powder coat
  • Standard 2″ receiver accepts common accessories
  • Bolt‑on design simplifies replacement or servicing
  • Generally user‑friendly installation with proper tools

Buy Now

Pros

  • Vehicle-specific fit for 2019-2023 RAV4 models
  • Solid, no-nonsense option for daily hauling
  • Straightforward bolt-on installation procedure

Cons

  • Requires 18mm wrench or special ratchet tool

WEISIGAO Hitch

Class 3 2″ receiver compatible with 2019–2025 Toyota RAV4 and RAV4 Prime; carbon steel construction with powder coat, 4,500 lb GTW and 675 lb TW; bolt‑on installation.

If you want a no‑nonsense hitch that’s easy to fit and built to handle real loads, this WEISIGAO receiver is a solid pick for newer RAV4s. You can rely on it for everyday tasks like hauling a bike rack or cargo carrier and for longer trips when you need extra capacity.

The bolt‑on design and sturdy construction make installation straightforward when you follow a few basic steps, and the tucked receiver keeps a clean look under the bumper. For a reliable, utilitarian hitch that stays out of the way, this one fits the bill.

Sentiment chart from the original article, not based on our own testing

Versatility

Works well with bike racks, cargo carriers and light trailers; the 2″ receiver accepts common accessories for weekend trips and everyday hauling.

Durability

The carbon steel frame and powder coat offer solid protection against road wear, and welded sections feel robust; touching up any delivery scuffs helps maintain the finish over time.

Key Benefits

  • High 4,500 lb gross trailer weight and 675 lb tongue weight
  • Carbon steel with powder coat for rust resistance
  • Bolt‑on design simplifies replacement or service
  • Designed for 2019–2025 RAV4 and RAV4 Prime fitment
  • Tucked receiver keeps a low, factory‑like profile

Buy Now

Pros

  • Strong 4,500 lbs GTW and 675 lbs towing weight
  • Works with RAV4 Prime for broader compatibility
  • Easy bolt-on installation takes minimal time

Cons

  • Powder coat may require touch-up in harsh climates

Related reading:

Frequently Asked Questions

Do these items fit every Toyota RAV4?

Not always. The RAV4 changed shape between generations, for example 2013-2018 and 2019-2025, so check the years and trim each listing states, and ask the seller if the listing does not say.

How much can my RAV4 tow?

Your owner manual states the towing and tongue-weight limits for your model year and equipment, and a hitch class does not raise them. Never exceed the limits in the manual.

Can I install these myself?

Many drop-in items need no tools, but anything that attaches to the body, the wiring or the hitch should follow the maker instructions and your owner manual. Stop if a step is unclear.

Is the information on this page from your own testing?

No. Details come from the Amazon listings and can change, so check the listing and recent reviews before you order.

Quick Buying Checklist

  • Check the model years and trim named on each listing.
  • Compare the stated dimensions with your vehicle where the listing gives them.
  • Read recent reviews on Amazon that mention fit.
  • Check the return policy before you order.
  • Details come from the Amazon listings and can change.

Buyer-preference chart from the original article, not based on our own testing

Wrapping Up

Match each item to your RAV4 model year, read the stated details and recent reviews on Amazon, and confirm anything that depends on fit before you buy. Links on this page are affiliate links.

Product Name Image Listing details Maximum Towing Capacity Material Finish Type
Draw-Tite 75235 Class 3 Trailer Hitch
Product Image
See listing 4,500 Pounds Alloy Steel Powder Coated
KUAFU Class 3 Trailer Hitch
Product Image
See listing 675 Pounds Professional Steel Powder Coated
TangMiGe Class 3 Trailer Hitch
Product Image
See listing 4,500 Pounds Carbon Steel Gloss Black Powder Coat
ILONPA 2″ Receiver Trailer Hitch
Product Image
See listing 4,000 Pounds Metal Powder Coated
AutoBeeDen Class 3 Trailer Hitch
Product Image
See listing 3,500 Pounds Carbon Steel Gloss Black Powder Coat
Draw-Tite 76134 Class 3 Trailer Hitch
Product Image
See listing 8,000 Pounds Alloy Steel Powder Coated
HECASA Class 3 Trailer Hitch
Product Image
See listing 4,000 Pounds Alloy Steel Powder Coated
WEISIGAO Class 3 Trailer Hitch
Product Image
See listing 4,500 Pounds Carbon Steel Powder Coated

This Roundup is reader-supported. When you click through links we may earn a referral commission on qualifying purchases.

Sharing Is Caring:
About the Author

Brian Keller founded Backpack and Gear to make shopping for car gear less of a guessing game. He sets the site’s editorial standards, decides which categories get covered, and edits buying guides before they go live. His own writing focuses on the Toyota RAV4, dash cams and tire inflators, and on the trade-offs between budget and mid-range options.

Leave a Comment