How to Change the Rear Wheel Bearing on a Toyota RAV4

To change the rear wheel bearing on a Toyota RAV4, lift and support the car on jack stands, remove the wheel, brake caliper, bracket and rotor, disconnect the wheel speed sensor, undo the hub or bearing mounting bolts, fit the new bearing or hub assembly and tighten everything to the torque in the service manual. The design differs by model year, with some bearings being part of a bolt-on hub unit and others needing a press, so check the manual for yours. It is an advanced job, so use a shop if you are unsure. Related: how to change the front wheel bearing on a Toyota RAV4.

Safety First: Preparing Your Vehicle for Rear Wheel Bearing Replacement

Change the rear wheel bearing on a Toyota RAV4 hub

Work on level ground, chock the wheels that stay on the ground, and support the car on jack stands, never on a jack alone. Let the brakes cool. Wear gloves and eye protection.

How to Change the Rear Wheel Bearing on a Toyota RAV4: Removal

  1. Remove the wheel.
  2. Remove the brake caliper and its bracket, and hang the caliper from the spring, not by the hose.
  3. Remove the rotor and disconnect the wheel speed sensor.
  4. Undo the axle or hub nut and the bearing or hub bolts as the manual directs, then remove the unit.

Installing Your New Wheel Bearing: Essential Steps and Common Mistakes to Avoid

Clean the mounting surface, fit the new bearing or hub assembly, and refit the sensor, rotor, caliper and wheel. Use parts made for your model year and drivetrain.

Proper Torque Specifications for a Secure Installation

secure installation torque specifications

Torque values differ by model year, so use the figures in the factory service manual for the axle nut, the hub bolts, the caliper bracket and the wheel nuts. Do not guess.

Troubleshooting Common Issues After Wheel Bearing Replacement

  • Humming noise: the bearing may be damaged or not fully seated.
  • Wheel speed or ABS warning: check the sensor connector.
  • Brake drag: check the caliper and the rotor.

Related reading:

Frequently Asked Questions

How Much Does It Cost to Replace a Wheel Bearing on a Toyota RAV4?

The cost varies by model year, parts and local labor. Ask a shop for a written quote.

Can I Replace Wheel Bearings Myself?

Some experienced owners do. If the bearing needs a press or you are not sure, have a shop do it.

What Is the Most Common Issue With the Toyota RAV4?

It depends on the model year. Check recalls and owner complaints for your year at nhtsa.gov.

What Are the Symptoms of a Bad Rear Wheel Bearing?

A humming or growling noise that changes with speed, play in the wheel, and sometimes vibration or an ABS warning light.

Conclusion

To change the rear wheel bearing on a Toyota RAV4, follow the manual for your year and use jack stands and the correct torque.

Sharing Is Caring:
About the Author

Brian Keller founded Backpack and Gear to make shopping for car gear less of a guessing game. He sets the site’s editorial standards, decides which categories get covered, and edits buying guides before they go live. His own writing focuses on the Toyota RAV4, dash cams and tire inflators, and on the trade-offs between budget and mid-range options.

Leave a Comment