Reset the brake pad service message on a Toyota Supra only after the pads (and the wear sensors, where fitted) have been replaced or inspected, because the message exists to warn you about wear. The current Supra uses BMW-based electronics, and the reset is normally done with a compatible diagnostic tool or at a shop, not with a button on the dash. The method varies by model year, so check the manual. Related: how to reset the brake fluid service reminder on a Toyota Supra and when to replace brake pads on a Toyota Supra.
Why You Should Reset Your Brake Pad Service Message
Once the pads and sensors have been replaced, the car still shows the old message until it is reset. Do not reset the message to hide a warning. If pads are worn, replace them.
Brake Pad Service Message on a Toyota Supra: Reset Options
Use a diagnostic tool that supports your car, or ask a shop or dealer to connect one. Do not rely on button sequences from forums.
Step 2: Accessing the Reset Menu for Brake Pad Service
In the tool’s service functions, find the brake pad item and select the reset. The wording depends on the tool and the car.
Frequent Resetting Challenges and How to Overcome Them
- The reset is refused: check that the sensor is connected and replaced, if fitted.
- The message returns: the pads may still be worn, or the sensor may be faulty.
- The tool cannot connect: check the adapter and the ignition state.
Step 4: Confirming the Brake Pad Reset
Check that the message has gone from the display and that no brake warning lights stay on. If anything remains, have the brakes inspected.
Keep Your Toyota Supra in Top Shape
Inspect the pads and rotors regularly, replace the brake fluid on schedule, and use the service schedule in the manual.
Related reading:
Frequently Asked Questions
How Do You Reset the Brake Light on a Supra?
A brake warning light may mean low fluid or a fault, not a service message. Check the fluid and the pads, and have it inspected.
How to Reset Brake Pad Service Light?
Replace the pads and the sensor if needed, then reset the message with a compatible tool.
How to Reset Vehicle Service Warning on Supra?
Service warnings are reset after the service, using the car’s menu or a diagnostic tool. See the manual.
How to Reset the Brake Pad Life?
This is part of the same service reset. Use a compatible tool after the pads have been replaced.
Conclusion
Reset the brake pad service message on a Toyota Supra only after pad service, using a compatible tool or a shop.
