MOTOOS 22×11-10 ATV/UTV tires are built for off-road use on 10-inch rims, rated 4-ply for sidewall strength. What’s included? Size 22×11-10, tubeless design, and 16 mm tread depth (about 0.63 in). They handle mud, dirt, gravel, and sand with non-directional, flat split knobs for consistent grip. Key limits: max 330 lb per tire, recommended PSI around 30. Not ideal for highway driving, check fit and load needs first. Keep going to compare value and setup tips.
Key Takeaways
- Evaluate traction and tread performance on mud, dirt, gravel, and sand with the flat, split knob pattern.
- Note tread depth (16 mm) and how impact-absorbing blocks affect comfort and vibration reduction.
- Confirm fitment for 10-inch rims with 9-inch width and ensure ATV/UTV wheel compatibility.
- Check load, ply rating, and recommended PSI (30) versus your vehicle’s weight before purchase.
- Consider limitations: tubeless convenience, non-directional grip, and not recommended for highway use.
MOTOOS 22×11-10 Tire Specs, Ply Rating, and Load Limits
What are the MOTOOS 22×11-10 tire specs, ply rating, and load limits?
MOTOOS 22×11-10 ATV UTV tires use a durable 4-ply rating for sidewall strength. They’re tubeless and built for off-road use on compatible ATV and UTV setups, or select utility vehicles.
MOTOOS 22×11-10 ATV UTV tires feature a durable 4-ply, tubeless off-road build for compatible ATV/UTV or utility setups.
Key Specs
- Size: 22×11-10
- Rim: 10-inch diameter, 9-inch width
- Recommended PSI: 30
- Tread depth: 16 mm (0.63 in)
Load Capacity & Limits
- Max load (per tire): 330 lbs
- Speed index: F
Buyer takeaways
– Confirm 10-inch rims and match load capacity needs before purchase.
How The Non-Directional Tread Grips Mud, Dirt, and Sand
Non-directional tread on the MOTOOS 22×11-10 ATV/UTV tires is designed to maintain grip across changing off-road surfaces, whether the rider is in mud, dirt, gravel, sand, or on mixed trails.
The tread design uses flat, split knobs to bite firmly without needing a specific rotation direction, helping traction stay consistent when conditions shift quickly.
In muddy ruts, knobs press into the surface and shed slurry. In sand and loose dirt, the wide contact area supports forward motion, improving grip performance.
Quick buyer takeaways
- Works on mud, dirt, gravel, and sand
- Non-directional tread design reduces “right side up” concerns
- Reliable grip performance for mixed trail use
Ride Comfort With 16mm Tread Depth and Impact-Absorbing Blocks
The MOTOOS 22×11-10 ATV UTV tires improve ride comfort by combining a deep 16 mm (0.63 in) tread with wide, impact-absorbing tread blocks that help smooth out harsh hits on rough trails.
How does comfort affect control?
Wide blocks work to support ride stability when the surface changes, and they can also deliver vibration reduction by cutting the shock that reaches the vehicle.
What to expect for real use?
- Best on dirt paths, gravel, and mixed terrain
- Recommended PSI: 30 for smoother contact
- 4-ply durability helps resist punctures during travel
Consider these tires when you want a calmer ride without highway use.
Where MOTOOS 22×11-10 Fits 10-Inch Rims On ATVs and UTVs
Sized for a 10-inch rim, the MOTOOS 22×11-10 ATV UTV tires are built to fit wheels with a 9-inch rim width and a 10-inch rim diameter, making them a straightforward replacement choice for compatible ATVs and UTVs that use this tire size.
| Fitment area | Rim requirement | Buyer guidance |
|---|---|---|
| ATV compatibility | 10 in dia, 9 in width | Verify your current sidewall size matches 22×11-10 |
| UTV performance | Tubeless, 4-ply | Good for off-road mixed surfaces, mud and gravel |
| Utility use | Selected mowers | Confirm clearance and load rating needs |
Quick checks
- 22×11-10 size, 330 lbs max load
- Tubeless fit, non-directional tread
Recommended PSI Settings and Why These Tires Aren’t for Highway Use
Recommended PSI: Where should the buyer start?
For MOTOOS 22×11-10 ATV UTV tires, a starting tire pressure of 30 PSI matches the stated spec.
Buyers should confirm cold pressure on their specific ATV/UTV and adjust for load, since the tires are rated up to 330 lbs.
Confirm cold tire pressure for your ATV/UTV and adjust for load—these tires are rated up to 330 lbs.
The all-terrain, tubeless build and non-directional tread are tuned for mud, dirt, gravel, and trails, not smooth pavement.
Lower, trail-focused tire pressure helps grip off-road, but it can hurt highway stability and highway safety.
Takeaways:
- Start at 30 PSI cold.
- Avoid highway speeds; F index is limited.
- Use for off-road traction, not pavement.
Frequently Asked Questions
Are These Tires Compatible With Most Tubeless ATV Rim Bead Sizes?
Yes, these tires are generally compatible with most tubeless ATV/UTV rim bead sizes that match their tire specifications.
They are sized 22×11-10, and they fit 10-inch rims, using rim compatibility guidance of a 9-inch rim width and tubeless construction.
As long as the rim is designed for 22×11-10 beads, they should seat and run properly.
They support off-road use, not highway use.
Takeaway: confirm 10-inch rim, 9-inch width.
How Long Do the 4-Ply Tread Blocks Typically Last Under Heavy Use?
Under heavy use, 4-ply tread blocks usually last about 2,000–4,000 miles, but that range varies widely. A practical benchmark is tread depth starting at 16 mm, then performance declines as blocks thin.
Key wear factors include PSI (recommended 30), load near the 330 lb max, hard braking, sharp turns, and abrasive sand or gravel.
Labeled quick tips—Check tread depth often; rotate if possible; match rim width 9 in.
Can I Use These Tires in Winter Snow and Slush Conditions?
Yes, these tires can be used in winter snow and slush for light ATV/UTV trails, but they are built for off-road traction, not highway ice.
Their non-directional 22×11-10 tread uses a split-knob, flat profile for winter traction on mud, dirt, gravel, and packed snow, though deep icy slicks may reduce control.
With 4-ply construction, they run at about 30 PSI.
Quick takeaways
- Dimensions: 22×11-10, fits 10-inch rims
- Best for: snow slush trails, yard utility use
- Limit: not an all-weather ice tire
What’s the Best Way to Clean Mud Buildup From the Non-Directional Tread?
Best way to clear mud buildup in non-directional tread is to let the tires cool, then rinse with low-pressure water, rotating the 22×11-10 tires on 10-inch rims.
Use a stiff brush or plastic scraper to push mud out of the split-knob blocks. For stuck dirt, soak briefly in warm water, mild soap, then rinse and dry.
- Prioritize tread maintenance
- Repeat mud removal after muddy rides
- Avoid high pressure that damages 4-ply sidewalls
Do These Tires Balance Easily, or Will I Need Extra Wheel Weights?
Yes, these MOTOOS 22×11-10 ATV/UTV tires usually balance easily, because the non-directional tread and 4-ply construction are consistent.
Still, mild vibration can happen from mount differences. For reliable tire performance, common balancing techniques include checking rim cleanliness, mounting with correct valve placement, and using stick-on or clamp weights only where the gauge shows.
With 10-inch rims, most buyers can expect minimal added weight.
– Takeaway: Try basic balance first, then add weights if needed.
Conclusion
Conclusion
MOTOOS 22×11-10 ATV/UTV tires are a practical choice for off-road riders needing stable traction, with a non-directional split-knob tread, 16 mm tread depth, and 4-ply durability. They mount to compatible 10-inch rims, fit loads up to 330 lbs per tire, and work best near 30 PSI for controlled handling. For muddy, dirt, gravel, and sand trails, they offer strong value.
Leave a Reply