To reset TPMS on a Toyota Supra, first set all four tires to the pressures on the door-jamb label, then follow the reset steps in the owner’s manual, which on many cars means a menu option on the display or a reset button, and drive for a few minutes so that the system can relearn the sensors. The exact steps vary by model year. Related: Toyota Supra TPMS light troubleshooting and how to reset TPMS on a Toyota RAV4.
How to Reset TPMS on a Toyota Supra and Fix the Light

The light comes on when a tire is well below its recommended pressure, or when the system has a fault. Fix the cause first: inflate the tires, check for a leak, and then reset if the manual says it is needed.
Get Ready to Reset: Check Your Tire Pressures First
Check all four tires cold with a gauge and set each to the figure on the door-jamb label. The front and rear can differ.
Step 1: Turn the Ignition to the “On” Position
Turn the car on without starting the engine, or start it, as the manual directs.
Step 2: Find the TPMS Reset in the Menu or on the Dash

Look in the vehicle settings menu on the display for a tire pressure or TPMS reset option, or at the reset button if your model has one. Confirm the exact method in your manual.
Step 3: Drive So the System Can Relearn
Many systems relearn after driving for a few minutes at moderate speed. Follow the figures in your manual rather than a rule from an article.
Confirm the Reset Worked
The light should go out. If it stays on, recheck the pressures and the steps.
Steps to Take If the TPMS Light Stays On

- Recheck all the tire pressures, including the spare if it is monitored.
- Look for a nail or a leak.
- Repeat the reset.
- See a tire shop if it persists.
Common TPMS Problems and How to Troubleshoot Them
- Light flashes then stays on: a system fault or a sensor problem.
- Sensor battery low: sensors are not user-serviceable, and a shop must replace them.
- New tires or wheels: the sensors may need to be programmed.
How Weather Impacts Your TPMS
Cold weather lowers the tire pressure and can turn the light on. Top up the tires and the light may go out after a short drive.
Related reading:
Frequently Asked Questions
How to Reset Toyota TPMS Sensors?
Follow the reset method in your manual after setting the correct pressures.
How Do I Manually Reset My TPMS Light?
Inflate the tires to the correct pressure, use the reset option in the manual, then drive for a few minutes.
Where Is the Toyota Tire Pressure Monitoring System Reset Button Hidden?
It depends on the model. Check the manual for the reset button or the menu entry.
Do Toyota TPMS Sensors Need to Be Programmed?
New or replacement sensors may need to be programmed, which a tire shop can do. Sensors that are already learned usually do not.
Conclusion
To reset TPMS on a Toyota Supra, correct the tire pressures, follow the reset method in the manual and drive to relearn.
